How do I setup static routing mode using 10.x.x.x addressing on WAN1?

General Product Information
A standard method for configuring the Edge appliance is to use private 10.x.x.x space between the Edge appliance and the WAN1 gateway router.
REQUIREMENT: You must have direct access to the WAN1 gateway router, and it should be local to the Edge appliance.
Steps for configuration:
1) Configure WAN1 of the Edge appliance with (example), the gateway address should be
2) Configure the LAN address with the old gateway router address (example)
3) Configure  the gateway router with
4) Add a static route for via
5) Test the routing and make sure that Edge firewall is allowing traffic through.

Add Feedback